Gatekeeper Y58 - Page 97

Y58 User Manual & Install Guide
97 of 148
For all channels, set the following:
CBR
Audio Coding Format
DEFAULT SETTINGS:
ADPCM
Copy
This feature allows you to easily copy the
configuration settings on this channel to
another selected channel. Use the drop-down
list to select a channel – then clicking the
(Copy) button will replicate all the current
settings to the selected channel.
Dual Stream
Storage Dual Stream
Recording
DEFAULT SETTINGS:
Checkbox- Unselected
Storage Dual Stream
Split
DEFAULT SETTINGS:
Disabled
SD Write Resource Ratio
DEFAULT SETTINGS:
0.0%
Record Storage
DEFAULT SETTINGS:
Internal SD
Record Mode
DEFAULT SETTINGS:
Alarm Backup
Alarm CH
DEFAULT SETTINGS:
Unselected All
OSD
Date/Time
Checkbox – if selected, the date and time will
be displayed as an overlay text on top of the
recorded video.
DEFAULT SETTINGS:
Checkbox – Selected
Vehicle Plate
Checkbox – if selected, the vehicle Plate will be
displayed as an overlay text on top of the
recorded video.
Notes:
- The Vehicle Plate data which the device will
overlay into the recorded video is actually
the identifier data which is set in the Basic