CHAPTER 4: Upgrading Your Computer
36
Removing the right side panel
To remove the right side panel:
1 Make sure that the left side panel has already been
removed by following the instructions in “Removing the
left side panel” on page 35.
2 Remove the two Phillips screws on the back edge of the
right side panel.
3 Slide the side panel toward the back of your computer,
then pull the panel away from your computer.
Warning
To avoid exposure to dangerous electrical voltages and moving parts, turn
off your computer, then unplug the power cord and modem cable before opening
the case.
Phillips screw
Phillips screw
To Next Page
Loading...
