CHAPTER 4: Upgrading Your Computer
42
4 If you are removing a memory module from a memory
slot, gently pull the plastic tabs away from the sides of
the memory module and remove it.
- OR -
If you are adding a memory module to an empty
memory slot, gently pull the plastic tabs away from the
sides of the memory slot.
5 Align the notch on the new module with the notch in the
memory slot and press the module firmly into the slot.
The tabs on the sides of the memory slot should secure
the memory module automatically.
6 Replace the side panel by following the instructions in
“Replacing the side panels” on page 39.
7 Return your computer to its upright position.
8 Reconnect the cables and the power cord.
9 Turn on your computer. Windows starts and the
Windows desktop appears.
10 Click (Start), right-click Computer, then click
Properties. The amount of memory in your computer
is displayed.
To Next Page
Loading...
Need help?
General
