9
Figure 2. Mounting the Panel
Identify Panel
Components
Before installing devices and making wiring connections, familiarize yourself with the main
panel components. Figure 3 shows the main component locations for the hardwire circuit board
and Figure 4 shows the main component locations for the combination hardwire/wireless circuit
board.
Figure 3. Hardwire and Combination Hardwire/Wireless Circuit Board Main Components
Installing Antennas
Install the antennas (included with panel) into the inside terminal of each antenna terminal block
on the combination hardwire/wireless panel (see Figure 4).
Figure 4. Installing the Antennas
Knockout Knockout
Mounting
Holes
Mounting
Holes
6 0 7 3 4 G 1 0 D . D S F
Backup Battery Connections
Red
Black
Power Line Carrier
Card Headers
Micro
Processor
EEPROM
SnapCard
Header
Phone
Supervision
Card Headers
Terminal Strip
Programming
Touchpad
Header
6 0 7 3 4
2 0 6 d . d s f
Backup Battery Connections
Antenna Terminal Blocks
RedBlack
Power Line Carrier
Card Headers
Programming
Touchpad
Header
Micro
Processor
EEPROM
Phone
Supervision
Card Headers
SnapCard
Header
Terminal Strip
Connect
To Inside
Terminal
To Next Page
Loading...
