32
Latchkey Reports (Phones—Pager Phone 1-5)
(pager 1: 0135, pager 2: 0145, pager 3: 0155, pager 4: 0165, pager 5: 0175)
(Default = on) This setting determines whether the panel reports to a pager when the system is
armed or disarmed, according to latchkey time scheduling.
¾
To turn Latchkey reports off or on:
With the display showing LATCHKEY RPTS OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting. Press # and the display shows the new setting.
Streamlining (Phones—Pager Phone 1-5)
(pager 1: 0136, pager 2: 0146, pager 3: 0156, pager 4: 0166, pager 5: 0176)
(Default = on) This setting determines whether the panel includes (off) or excludes (on) the
account number when reporting to a pager.
¾
To turn Streamlining off or on:
With the display showing STREAMLINING OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting. Press # and the display shows the new setting.
Ptn Assignment (Phones—Pager Phone 1-5)
(pager 1: 0137, pager 2: 0147, pager 3: 0157, pager 4: 0167, pager 5: 0177)
(Default = 1) This setting determines the partition that reports to a pager. Both partitions can be
assigned to report to a single pager.
¾
To set up Partition Assignments for pager reporting:
With the display showing PTN ASSIGNMENT 1/2/12 (current setting), press 1 or 2 to select par-
tition 1 or 2 (press 1 and 2 to select both partition 1 and 2). The display flashes the entered
setting. Press # and the display shows the new setting.
The following describes how to program the phone settings that appear under
DOWNLOADER
PHONE
.
Phone Number (Phones—Downloader Phone)
(0180)
(Default = none) Use this setting to enter the phone number of an off-site computer that can be
used to program the panel through the phone line. Phone numbers can be 1 to 24 digits long,
including pauses or * and # characters.
Note
Call-waiting services should
be disabled to prevent inter-
rupting panel communica-
tion to the downloader. To
program a dialing prefix that
disables call-waiting, see the
Call Wait Cancel setting
under the menu
PHONE
OPTIONS—GLOBAL
.
To enter pauses, press C.
To enter *, press and hold 7 for about two seconds.
To enter #, press and hold 9 for about two seconds.
¾
To program a downloader phone number:
With the display showing PHONE NUMBER (current number), enter the desired phone num-
ber. The display flashes the entered number. Press # and the display shows the new setting.
¾
To delete a downloader phone number:
With the display showing PHONE NUMBER (current number), press D to erase the number.
The display shows PHONE NUMBER_.
Phone Options Menu
The PHONE OPTIONS menu lets you set up system phone access and communications that affect
the whole system (global) or a specific partition.
The following describe how to program the phone option settings that appear under
GLOBAL.
Phone Test (Phone Options—Global)
(02000)
(Default = on) This setting determines if the user can, at any time, test the communication from
the panel to the central station or a pager by entering 8 + CODE + 2 (# + 8 + CODE + 2 from a
touch-tone phone).
¾
To turn the Phone Test setting off or on:
With the display showing PHONE TEST OFF/ON (current setting), press 1 (off) or 2 (on). The
display flashes the entered setting. Press # and the display shows the new setting.
To Next Page
Loading...
