39
ple, if 5 is entered, any keychain touchpads learned into zones 1–5 will be latchkey users and all
others (6–76) will not.
¾
To set the number of Latchkey Zones:
1. With the display showing LATCHKEY ZONES nnn (current setting), enter the desired number of
latchkey zones (1–76). The display flashes the entered setting.
2. Press # and the display shows the new setting.
¾
To delete/disable Latchkey Zones:
With the display showing LATCHKEY ZONES nnn (current setting), press D.
The following sections describe the touchpad option settings that appear under
PARTITION 1-2.
Fire Panic (Touchpad Options—Partition 1-2)
(partition 1: 0510, partition 2: 0520)
(Default = on) This setting determines whether touchpad fire panic buttons are enabled (on) or
disabled (off).
¾
To change the Fire Panic setting:
With the display showing FIRE PANIC OFF/ON (current setting), press 1 (off) or 2 (on). The
display flashes the entered setting. Press # and the display shows the new setting.
Aux. Panic (Touchpad Options—Partition 1-2)
(partition 1: 0511, partition 2: 0521)
(Default = on) This setting determines whether touchpad auxiliary panic buttons are enabled (on)
or disabled (off).
¾
To change the Auxiliary Panic setting:
With the display showing AUXILIARY PANIC OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting. Press # and the display shows the new setting.
Police Panic (Touchpad Options—Partition 1-2)
(partition 1: 0512, partition 2: 0522)
(Default = on) This setting determines whether touchpad police panic buttons are enabled (on) or
disabled (off).
¾
To change the Police Panic setting:
With the display showing POLICE PANIC OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting. Press # and the display shows the new setting.
Keychain TP Arm (Touchpad Options—Partition 1-2)
(partition 1: 0513, partition 2: 0523)
(Default = off) When this setting is on, pressing the lock button on keychain touchpads arms the
system directly to AWAY with NO DELAY.
When this setting is off, each key-press increments the arming level (i.e., from OFF to STAY,
from STAY to AWAY).
¾
To change the Keychain Touchpad Arming setting:
With the display showing KEYCHAIN TP ARM OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting. Press # and the display shows the new setting.
Star Is No Delay (Touchpad Options—Partition 1-2)
(partition 1: 0514, partition 2: 0524)
(Default = off) This setting determines whether the keychain touchpad star button controls an
output (off) or the No Delay feature (on).
¾
To change the keychain Star Is No Delay setting:
With the display showing STAR IS NO DELAY OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting. Press # and the display shows the new setting.
Reporting Menu
The REPORTING menu lets you set up which system events are reported to the central monitoring
station. The following describes how to program the reporting settings that appear under
GLOBAL
To Next Page
Loading...
