26
Figure 41. Menu Item Heading
Shortcut numbers can be used from any setting location within tier 2.
¾
To advance to tier 2 program menus:
With the system in program mode and the display showing SYSTEM PROGRAMMING, press #
once. The display should show SECURITY.
Security Menu
The SECURITY menu lets you choose whether security settings affect the whole system (global) or
a specific partition.
¾
To access global or partition security menu items:
1. With the display showing SECURITY, press #. The display should show GLOBAL.
2. Press # again to advance to global settings, or press A or B to display
PARTITION n, then press
# to advance to selected partition 1 or 2 settings.
The following describes how to program the security settings that appear under
GLOBAL.
Downloader Code (Security-Global)
(0000)
Note
The Downloader Code can-
not be deleted or cleared
from panel memory. To
change the Downloader
Code to its default setting,
enter 12345.
(Default = 12345) The 5-digit downloader code is used in conjunction with downloader program-
ming. The downloader operator must have the panel account number and downloader code in
order to perform any programming.
¾
To program a Downloader Code:
With the display showing DOWNLOADER CODE nnnnn (current code), enter the desired 5-digit
code. The display flashes the entered code. Press # and the display shows the new code.
Installer Code (Security-Global)
(0001)
Note
The Installer Code cannot
be deleted or cleared from
panel memory. To change
the Installer Code to its
default setting, enter 4321.
(Default = 4321) The 4-digit installer code is used for entering program mode and changing sys-
tem settings. If a dealer code is programmed, only those settings not associated with phone num-
bers can be changed.
¾
To program an Installer Code:
With the display showing INSTALLER CODE nnnn (current code), enter the desired 4-digit
code. The display flashes the entered code. Press # and the display shows the new code.
Dealer Code (Security-Global)
(0002)
Note
The Dealer Code cannot be
deleted by clearing panel
memory.
(Default = none) The 4-digit dealer code is used to prevent unauthorized persons from changing
the programmed central station phone numbers. When this feature is enabled, central station
phone numbers cannot be changed (unless you enter the program mode by using the dealer code).
All other system settings are still accessible by entering the program mode with the installer
code.
¾
To program a Dealer Code:
With the display showing DEALER CODE ****, enter the desired 4-digit code. The display
flashes the entered code. Press # and the display shows the new code.
¾
To delete a Dealer Code:
With the display showing DEALER CODE nnnn (current code), press D. The display shows
DEALER CODE ****.
Access Code Lock (Security—Global)
(0003)
(Default = on) This setting determines whether or not the panel will include Access Codes when
sending user information to the automation module. When this option is on, it means the Access
Codes are not sent.
D o w n l o a d e r C o d e ( S e c u r i t y - G l o b a l )
( 0 0 0 0 )
Menu Name
Shortcut Number
Location
To Next Page
Loading...
