GE Interlogix Concord Security System User Manual

Concord
81
89
90
91
92
93
94
95
96
Table A3: Zone and Sensor Assignments (Continued)
No. RF Zone
Module Bus
ID Number
Module Input
Number
Group Partition Zone/Sensor Text
Table A4: System Settings Index and Record
Setting (reference) default Shortcut No. Setting
Installer Programming—8 + Installer/Dealer CODE + 00
24 Hour Tamper Off 06000
AC Failure Off 06010
Access Code Lock (On) 0003
Access Timeout 90 sec 0904
Account No. 00000 0010, 0020 1_____________2_____________
Activity Timeout 24 hrs 0305
Alarm Verify Off 06108, 06208 1_____________2_____________
Audio Mode 1 0901
Audio Verify Off 0900
Auto Phone Test Off 02001
Auto Stay Arming On 0014, 0024 1_____________2_____________
Auto Test Reset On 02002
Auxiliary Panic On 0511, 0521 1_____________2_____________
AVM Access Code None 0906
Back In Service On 06002
Backup CS Phone 1 On, CS Phone 2-3 Off 0105, 0115, 0125 1_____________2_____________3___________
Battery Restoral Off 06005
Beep Delay 2 sec 0905
Buffer Control Off 06001
Buffer Full Report Off 06006
Bypass Reports Off 06003
Call Wait Cancel None 02009
Cancel Message On 02007
Cellular Backup CS Phone 1 On, CS Phone 2-3 Off 0107, 0117, 0127 1_____________2_____________3___________
Cellular System B
Closing Reports Off 06101, 06201 1_____________2_____________
Comm. Failure On 02003
CS Phone 1-3 None 0100, 0110, 0120 1_____________2_____________3___________
Daylight Saving On 0306
Dealer Code None 0002
Delete Sensors None 082
Dial Tone Detect On 02010

GE Interlogix Concord Security System Specifications

General

Brand	GE Interlogix
Model	Concord Security System
Category	Security System
Language	English