GE Security Simon XT - Using an offsite phone

Chapter 2
Planning
11
System configuration
Table 6 is a worksheet for you to record the desired values for each programming option. For each option, the
default value, effect of deletion (pressing DISARM while editing), range, and programming privilege are also
listed. Each option is described in more detail in Chapter 4 Programming on page 29.
Table 6. System programming menu options
Function Default Delete Range
Access
code
a
Installer
settings
Access codes menu
Dealer code 654321, 54321,
4321, or 321
None 3 to 6 digits D
Installer code 654321, 54321,
4321, or 321
None 3 to 6 digits D, I
Master code 123456, 12345,
1234, or 123
None 3 to 6 digits D, I, M
User code 1 None None 3 to 6 digits D, I, M
User code 2 None None 3 to 6 digits D, I, M
User code 3 None None 3 to 6 digits D, I, M
User code 4 None None 3 to 6 digits D, I, M
User code 5 None None 3 to 6 digits D, I, M
User code 6 None None 3 to 6 digits D, I, M
User code 7 None None 3 to 6 digits D, I, M
User code 8 None None 3 to 6 digits D, I, M
Duress code None None 3 to 6 digits D, I, M
Code length 4 4 3 to 6 D
Security menu
Account number 00000 00000 0 to FFFFFFFFFF D, I
Downloader code 12345 12345 00000 to 99999 D
Phone lock Off Off On/Off D
Autoarm On Off On/Off D, I
Exit extension On Off On/Off D, I
Secure arming Off Off On/Off D, I
No arm low battery Off Off On/Off D, I
Quick exit Off Off On/Off D, I
Downloader enable On Off On/Off D, I, M
Supervisory protest Off Off On/Off D, I