Chapter 3 Installing the system
This section describes how to open the panel for mounting, mount the panel,
connect sirens, connect hardwired contacts, and connect the AC power
transformer.
In this chapter:
Opening panel cover and chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Mounting the panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Connecting hardwired devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
HW1 I/O, HW2 in, and HW1&2 DC out terminals. . . . . . . . . . . . . .20
Interior sirens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
LD105 hardwired interior siren . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Hardwired contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Wiring a phone line to the panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
No line seizure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Full line seizure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Wiring the power transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Powering up the panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Installing X10 modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28