GE Security Simon XT Installation Manual

Simon XT
Installation Manual
32
Menu navigation
Each menu contains a list of options and/or submenus. Press the scroll up/down buttons to navigate up and
down the list of options and submenus in that menu. Pressing the Enter key after navigating to an option
selects that option for editing and flashes the current value. Pressing the Enter key after navigating to a
submenu enters that submenu, making a new list of options accessible. Pressing STATUS exits a menu and
goes to the next higher level.
Programming options are arranged in a menu structure as outlined in Table 8. The top menu contains several
features, as well as the System Programming menu. When accessing the System Programming or System Tests
menu, the panel prompts you to enter an access code. To continue, enter the Dealer Code or Installer Code,
then press Enter.
To program an option, first navigate to that option until it is displayed, then press Enter. The option value will
start flashing, indicating that it is ready to be changed. Use the scroll keys or enter a numerical value to change
the option, then press the Enter key to save the change.
Table 8. Simon XT menu structure
System time
Security
Enable scheduled lights
Account number
Enable sensor-activated lights
Downloader code
Enable chime
Phone lock
Enable special chime
Autoarm
System tests
Exit extension
Sensor test Secure arming
Communication test No arm on panel low battery
Initiate download call Quick exit
System programming
Downloader enable
Access codes Supervisory protest
Dealer code
Phone #s
Installer code Phone #1
Master code Phone #2
User code 1 Phone #3
User code 2 Phone #4
User code 3 Downloader phone number
User code 4
Phone options
User code 5 Manual phone test
User code 6 Fail to communicate
User code 7 DTMF dialing
User code 8 300 bps baud rate
Duress code Ring/hang/ring
Code length Dialer delay
Call waiting code

GE Security Simon XT Specifications

General

Brand	GE Security
Model	Simon XT
Category	Security System
Language	English