Chapter 2
Planning
13
24-hour sensor tamper
report
Off Off On/Off D, I
Supervisory/tamper report Off Off On/Off D, I
No usage Off Off 2 to 254 days, Off D, I
Swinger shutdown On Off On/Off D, I
Programming report Off Off On/Off D, I
Fire alarm verification Off Off On/Off D, I
Report communication
modes
Phone 1 report mode Off Off ALL SIA
ALL CID
Alarms SIA
Alarms CID
Nonalarms SIA
Nonalarms CID
Backup SIA
Backup CID
Voice dialer
Off
D
Phone 2 report mode Off Off D
Phone 3 report mode Off Off D, I
Phone 4 report mode Off Off D, I
Timers menu
Latchkey time None None 12:00 midnight to 11:59 PM,
None
D, I, M
Entry delay 30 sec. SIA limits on: 30 sec.
SIA limits off: 5 sec.
SIA limits on: 30 to 240 sec.
SIA limits off: 5 to 240 sec.
D, I
Exit delay 60 Seconds SIA limits on: 45 sec.
SIA limits off: 5 sec.
SIA limits on: 45 to 254 sec.
SIA limits off: 5 to 254 sec.
D, I
No activity timeout Off Off 2 to 24 hours D, I
Auto phone test Off Off 1 to 254 days D, I
Supervisory time Midnight None 12:00 midnight to 11:59 PM,
None
D, I
Alarm cancel 6 minutes Off 6 to 255 minutes, Off D, I
RF timeout (supsync) 12 hours 12 hours 2 to 36 hours D, I
Fail to open time Off Off 12:00 midnight to 11:59 PM, Off D, I
Fail to close time Off Off 12:00 midnight to 11:59 PM, Off D, I
Siren timeout 4 minutes Off - No timeout 2 to 254 minutes, Off D, I
Table 6. System programming menu options (continued)
Function Default Delete Range
Access
code
a
Installer
settings