GE AF-650 GP - Logic to Power Interface Explanation

[125] ft³/s
[126] ft³/min
[127] ft³/h
[130] lb/s
[131] lb/min
[132] lb/h
[140] ft/s
[141] ft/min
[145] ft
[160] °F
[170] psi
[171] lb/in²
[172] in WG
[173] ft WG
[180] HP
K-31 Min Value of Custom Readout
Range: Function:
0.00Unit* [-999999.99 - par. F-32] This parameter sets the min. value of the custom defined readout (occurs at zero speed). Only possible
to set different from 0 is when selecting a linear unit in par. K-30 Unit for Custom Readout. For Quadratic
and Cubic units the minimum value will be 0.
K-32 Max Value of Custom Readout
Range: Function:
100.00 Cus-
tomReadou-
tUnit*
[par. F-31 - 999999.99 CustomRea-
doutUnit]
This parameter sets the max value to be shown when the speed of the motor has reached the set value
for (par. F-17 Motor Speed High Limit [RPM] and par. F-15 Motor Speed High Limit [Hz]).
3.2.5 K-4# Keypad Buttons
Parameters for configuring the graphical Keypad Hand, Off, Auto, & Reset keys.
K-40 [Hand] Button on Keypad
Option: Function:
[0] Disabled No function
[1] * Enabled [Hand ] Key enabled
[2] Password Protection Avoid unauthorized start in Hand mode. If par. K-40 [Hand] Button on Keypadis included in the My Personal
Menu, then define the password in par. K-65 Quick Menu Password0-65 Personal Menu Password. Oth-
erwise define the password in par. K-60 Main Menu Password0-60 Main Menu Password.
K-41 [Off] Button on Keypad
Option: Function:
[0] Disabled Avoids accidental stop of the frequency converter.
[1] * Enabled
[2] Password Protection Avoids unauthorised stop. If par. K-41 [Off] Button on Keypad is included in the Quick Menu, then define
the password in par. K-65 Quick Menu Password.
K-42 [Auto] Button on Keypad
Option: Function:
[0] Disabled avoid accidental start of the frequency converter in Auto mode.
AF-650 GP Programming Guide
33
3