GE AF-650 GP - Converter Power Section and Operation Sequence; Power Section Components and Function

[1] * Enabled
[2] Password Protection Avoids unauthorised start in Auto mode. If par. K-42 [Auto] Button on Keypad is included in the Quick
Menu, then define the password in par. K-65 Quick Menu Password.
K-43 [Reset] Button on Keypad
Option: Function:
[0] Disabled Avoids accidental alarm reset.
[1] * Enabled
[2] Password Protection Avoids unauthorised resetting. If par. K-43 [Reset] Button on Keypad is included in the Quick Menu, then
define the password in par. K-65 Quick Menu Password.
3.2.6 K-5# Copy/Save
Copy parameter settings between set-ups and to/from the keypad.
K-50 Keypad Copy
Option: Function:
[0] * No copy
[1] All to Keypad Copies all parameters in all set-ups from the frequency converter memory to the Keypad memory.
[2] All from Keypad Copies all parameters in all set-ups from the Keypad memory to the frequency converter memory.
[3] Size indep. from Keypad Copy only the parameters that are independent of the motor size. The latter selection can be used to
programme several frequency converters with the same function without disturbing motor data.
This parameter cannot be adjusted while the motor is running.
K-51 Set-up Copy
Option: Function:
[0] * No copy No function
[1] Copy to set-up 1 Copies all parameters in the present Programming Set-up (defined in par. K-11 Edit Set-up) to Set-up 1.
[2] Copy to set-up 2 Copies all parameters in the present Programming Set-up (defined in par. K-11 Edit Set-up) to Set-up 2.
[3] Copy to set-up 3 Copies all parameters in the present Programming Set-up (defined in par. K-11 Edit Set-up) to Set-up 3.
[4] Copy to set-up 4 Copies all parameters in the present Programming Set-up (defined in par. K-11 Edit Set-up) to Set-up 4.
[9] Copy to all Copies the parameters in the present set-up over to each of the set-ups 1 to 4.
3.2.7 K-6# Password Protection
Parameters for setting the Password Protection for the drive parameters.
K-60 Main Menu Password
Range: Function:
100* [0 - 999] Define the password for access to the Main Menu via the [Main Menu] key. If par. K-61 Access to Main
Menu w/o Password is set to Full access [0], this parameter will be ignored.
K-61 Access to Main Menu w/o Password
Option: Function:
[0] * Full access Disables password defined in par. K-60 Main Menu Password.
[1] Read only Prevent unauthorized editing of Main Menu parameters.
[2] No access Prevent unauthorized viewing and editing of Main Menu parameters.
AF-650 GP Programming Guide
34
3