5 Prepare the system for a run
About this chapter
This chapter describes the preparations necessary to prepare the system before starting
a run.
Safety precautions
WARNING
Do not use ÄKTA pure if it is not working properly, or if it has suffered
any damage, for example:
•
damage to the power cord or its plug
•
damage caused by dropping the equipment
•
damage caused by splashing liquid onto it
WARNING
Always use appropriate Personal Protective Equipment (PPE) during
operation and maintenance of this product.
WARNING
Do not use any accessories not supplied or recommended by GE.
CAUTION
Fire Hazard. Before the system is turned on, make sure that there
is no unintentional leakage of flammable liquids, or other buffers,
in ÄKTA pure or tubing.
ÄKTA pure Operating Instructions 29022997 AF 101
5 Prepare the system for a run
To Next Page
Loading...
