GE akta pure - 4.1 Site Preparation

4.1 Site preparation
Introduction
This section describes the site planning and the preparations necessary for the installation
of ÄKTA pure. The purpose is to provide planners and technical staff with the data
needed to prepare the laboratory for the installation.
The performance specifications of the system can be met only if the laboratory environ-
ment fulfills the requirements stated in this chapter.
In this section
See pageSection
574.1.1 Delivery and storage
594.1.2 Room requirements
624.1.3 Site environment
644.1.4 Power requirements
654.1.5 Computer requirements
674.1.6 Required materials
56 ÄKTA pure Operating Instructions 29022997 AF
4 Installation
4.1 Site preparation