GE akta pure - Start the Instrument and the Computer

4.2.6 Start the instrument and the computer
Introduction
This section describes how to start the instrument and the computer.
Instruction
Follow the instructions below to start the instrument and the computer.
ActionStep
Switch on the instrument by pressing the power switch to the I position.1
Result: The instrument starts and the Instrument control panel displays a
white, slowly flashing light.
Turn on the computer and monitor according to the manufacturer's instruc-
tions.
2
86 ÄKTA pure Operating Instructions 29022997 AF
4 Installation
4.2 Hardware installation
4.2.6 Start the instrument and the computer