GE akta pure - Page 46

Illustration of the Instrument
control panel
The Instrument control panel is located to the right on the front of the instrument. It
shows the current status of the system using four LED lights. The Pause and Continue
buttons can be used to control an ongoing method run.
1
2
3
4
FunctionPart
Power/Communication indicator (white)1
Continue button with a green light indicator2
Pause button with an orange light indicator3
Alarm and error indicator (red)4
Status indications
The light indicators on the Instrument control panel indicate the current status of ÄKTA
pure.
The table below describes the different states that can be displayed.
46 ÄKTA pure Operating Instructions 29022997 AF
3 System description
3.1 ÄKTA pure instrument overview