Position the air trap tubing
Step Action
1 Locate the air trap tubing that contains the air trap, tubing size adapter,
a
nd the sensors CE-101/TE-101, PE-111, PE-112, and AE-152.
2 Hold the air trap at its base with your left hand and the filter tubing loop
w
ith your right hand, then push in the air trap in its snap holder.
5 Preparation
5
.2 Install disposable flow kits
ÄKTA ready XL Operating Instructions 29281616 AE 107
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
