Install the inlet manifolds and air
t
rap tubing
Note: Open the pinch valve, insert tubing and close the valve by performing the
following actions:
1. Position the tubing and open the valve safety cover.
2. Slide back the valve finger guard.
3. Insert the tubing by squeezing the tubing on each side of the valve.
4. Close the valve safety cover.
5 Preparation
5
.2 Install disposable flow kits
ÄKTA ready XL Operating Instructions 29281616 AE 111
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
