Moving ÄKTA ready XL over uneven surfaces requires the use of a forklift. Before lift-
i
ng the system the pump wagon must be disconnected.
Follow the instructions below to disconnect the pump wagon from the system and
move the wagon and system using a forklift.
Disconnect and move the pump
wagon
Step Action
1 Open the pump wagon door and unlock the two locking pins on the pump
w
agon frame by pulling them and turning them clockwise.
2 Pull out the pump wagon.
4 Installation
4
.2 Transport and moving of the system
82
ÄKTA ready XL Operating Instructions 29281616 AE
*** TeDIS Valid on Date Printed Printed on: 15-09-2023 11:27:35 ***
To Next Page
Loading...
