5.1.1 Start the system and software
Start ÄKTAprocess
CAUTION
When handling the operator console, make sure that no body parts
are caught between the sections of the console arm.
ActionStep
Make sure that the air supply to the system is turned on.1
Turn on the UPS if used.2
Make sure that the cabinet doors are closed and locked.3
Switch on power to ÄKTAprocess by turning the SYSTEM POWER SWITCH
to the "ON" position. See Section 3.2 Illustrations of ÄKTAprocess, on page 44
for location.
4
After this sequence is completed, the following occurs:
•
The built-in computer is turned on
•
The POWER indicator lamp flashes.
When communication with UNICORN software is established, the POWER in-
dicator lamp will show a steady green light.
Note:
ÄKTAprocess Operating Instructions 29-0252-49 AA 113
5 Operation
5.1 Prepare the system
5.1.1 Start the system and software
To Next Page
Loading...
