GE AKTAprocess - Safety precautions

2.1 Safety precautions
Introduction
The safety precautions in this section are grouped in the following categories:
•
General precautions, on page 17
•
Flammable liquids and explosive environment, on page 18
•
Personal protection, on page 19
•
Installing and moving, on page 20
•
Power supply, on page 23
•
Sample pump, on page 24
•
System operation, on page 25
•
Maintenance, on page 28
Some of the safety precautions in this chapter may concern components or
situations described in other ÄKTAprocess product documents.
Note:
General precautions
WARNING
Perform a risk assessment for any risks due to the process or pro-
cess environment. Evaluate the effects the use of ÄKTAprocess and
the operational processes may have on the classification of the
hazardous area. The process might cause the area to increase or
the zone classification to change. Implement the risk reduction
measures needed, including use of personal protection equipment.
WARNING
The customer must make sure that all installation, maintenance,
operation and inspection is carried out by qualified personnel who
are adequately trained, understand and adhere to local regulations
and the operating instructions, and have a thorough knowledge
of ÄKTAprocess and the entire process.
ÄKTAprocess Operating Instructions 29-0252-49 AA 17
2 Safety instructions
2.1 Safety precautions