GE AKTAprocess User Manual

4.4.1 Assembly of ÄKTAprocess
Introduction
Apart from the operator console, the ÄKTAprocess is delivered fully assembled. This
section describes the steps needed to mount the operator console, and how to lock the
wheels.
Lock the wheels
After positioning the system at its designated location, lock the wheels (illustrated below).
Operator console
CAUTION
Make sure that the console arm is firmly positioned with the top
part of the handle fully inserted, so that the bushing is able to ab-
sorb the weight of the console when the console arm is fully extend-
ed. The console may fall and cause damage and/or injury if the
console arm is not properly positioned.
CAUTION
When handling the operator console, make sure that no body parts
are caught between the sections of the console arm.
The operator console is packed separately in a cardboard box which is enclosed in the
system crate.
ÄKTAprocess Operating Instructions 29-0252-49 AA 89
4 Installation
4.4 ÄKTAprocess Setup
4.4.1 Assembly of ÄKTAprocess

GE AKTAprocess Specifications

General

Brand	GE
Model	AKTAprocess
Category	Laboratory Equipment
Language	English