GE AKTAprocess User Manual

4.4.6 Connect a column
Introduction
This section outlines the steps needed to connect a column to ÄKTAprocess.
Important
NOTICE
Make sure that the connections to the column and system comply
with the requirements in the column and system Operating Instruc-
tions.
Considerations for AxiChrom
columns
AxiChrom columns can be packed using ÄKTAprocess and Intelligent Packing.
Small diameter columns, up to 200 mm diameter, use ÄKTAprocess pumps to drive the
adapter hydraulically.
Larger AxiChrom columns, 300 mm diameter and above, use an AxiChrom Master con-
nected to the ÄKTAprocess Profibus connector.
See respective AxiChrom column manuals for information on hose connections.
For more details regarding using AxiChrom with ÄKTAprocess, refer to the AxiChrom
user manual.
Preparations
The air sensor alarm(s) before the column must be disabled before filling the system/col-
umn with liquid (Alarms:Air_Alarm:Disabled).
102 ÄKTAprocess Operating Instructions 29-0252-49 AA
4 Installation
4.4 ÄKTAprocess Setup
4.4.6 Connect a column

GE AKTAprocess Specifications

General

Brand	GE
Model	AKTAprocess
Category	Laboratory Equipment
Language	English