3.1 Configurations
Introduction
ÄKTAprocess can be individually configured according to the specific process require-
ments. This section summarizes the standard and optional components of ÄKTAprocess,
and indicates where further information on these components is to be found.
Components
Standard ÄKTAprocess components are described in Section 3.3 Standard components,
on page 53.
Optional ÄKTAprocess components are described in Section 3.4 Optional components,
on page 65.
The UNICORN control system is described in Section 3.6 UNICORN control system, on
page 77. The product documentation package includes the Software Configuration De-
scription, which describes all functions of the control software in detail.
Tubing and cabinet
ÄKTAprocess can be delivered with tubing dimensions from 6 mm to 1" and with a cab-
inet type of Cabinet 10 or Cabinet 30. The differences between the cabinet types are
specified in Cabinet type specific data, on page 165.
Process tubing materials can be stainless steel or polypropylene. Temperature and
pressure limits for the these materials are specified in Temperature and pressure limits,
on page 166.
ÄKTAprocess Operating Instructions 29-0252-49 AA 43
3 System description
3.1 Configurations
To Next Page
Loading...
Need help?
General
