WARNING
National Codes and standards (NEC, VDE, BSI, IEC, UL etc.) and local
codes outline provisions for safely installing electrical equipment.
Installation must comply with specifications regarding wire types,
conductor sizes, plug, branch circuit protection and disconnect
devices. Failure to do so may result in personal injury and/or
equipment damage.
WARNING
All electrical installations must be performed by authorized
personnel only.
CAUTION
Do not use an Uninterruptible Power Supply (UPS) outside the range
100 to 240 V. For UL-classified systems, do not use a UPS supply
exceeding 120 V.
CAUTION
Connection of an Uninterruptible Power Supply (UPS) shall only be
performed by authorized personnel to avoid mismatching or con-
nection errors. Contact your local GE Healthcare representative
for more information.
Sample pump
WARNING
Always move or lift the sample pump separately and disconnected
from the ÄKTAprocess system. The units must always be moved
individually.
24 ÄKTAprocess Operating Instructions 29-0252-49 AA
2 Safety instructions
2.1 Safety precautions
To Next Page
Loading...
Need help?
General
