Clean external surfaces
ÄKTAprocess is designed to be operated in a clean environment and the external surfaces
should not normally accumulate any substantial amount of dust or dirt.
Regularly, wipe the outside of ÄKTAprocess with a clean cloth. Use a mild cleaning agent
such as water, followed by 70% ethanol. Regular wiping and care of the equipment will
help keep the surfaces free from corrosion.
It is not recommended to spray or splash liquids towards external surfaces of
ÄKTAprocess.
ÄKTAprocess Operating Instructions 29-0252-49 AA 137
6 Maintenance
6.2 Cleaning
6.2.1 Important considerations for cleaning
To Next Page
Loading...
