Safety labels
The table below describes the various safety labels that may be found on ÄKTAprocess.
DescriptionSymbol/text
Warning! Read the user documentation before using
the system. Do not open any covers or replace parts
unless specifically stated in the user documentation.
Warning! High Voltage. Always make sure that the
system is disconnected from electric power before
opening the cabinet doors or disconnecting any electric
device.
EMERGENCY STOP label, yellow with black text.
(emergency stop button is red).
See Section 2.3 Emergency procedures, on page 34 for
further information regarding the emergency stop.
WARNING! High voltage inside cabinet! Authorized
personnel only! For continued protection against fire,
only replace fuses with the same type and rating.
For continued protection
against fire replace only with
same type and rating of fuse
High voltage inside cabinet!
Authorised personnel only!
WARNING!
CAUTION! Pressure control valve shall be set to 5.5 – 7
bar g for instrument air supply.
CAUTION!
Pressure control valve
shall be set to
5.5 – 7 bar g
for instrument air
supply
32 ÄKTAprocess Operating Instructions 29-0252-49 AA
2 Safety instructions
2.2 Labels
To Next Page
Loading...
Need help?
General
