Procedure
Refer to the unpacking instructions attached to the outside of the crate when unpacking
the crate. In the absence of unpacking instructions, follow the general unpacking instruc-
tions below.
ActionStep
Remove the front, side and back panels by loosening the bolts/brackets
marked with black paint.
1.
Loosen bolts/brackets holding the equipment to the crate bottom.2.
Roll the system out of the crate using the ramp that is found inside the crate.
WARNING
Heavy object. Because of the significant weight of
ÄKTAprocess, great care must be taken not to cause
squeezing or crushing injuries during movement. At
least two, but preferably three or more, persons are
recommended when moving the unit.
3.
ÄKTAprocess Operating Instructions 29-0252-49 AA 87
4 Installation
4.3 Unpack ÄKTAprocess
To Next Page
Loading...
Need help?
General
