PanaView™ for IDM-Compatible Meters (916-086B) F-11
September 2004
Plotting Transducer
Signals
To plot the selected signal, click on Plot. A graphical window opens,
as shown in Figure F-12 below.
Figure F-12: Signal Graph Window
Saving Transducer Signals To save the raw signal, click Save. A window opens similar to
Figure F-13 below. Enter the desired name, and click Save to save the
signal as a text file.
Figure F-13: Save As Window
Clearing Totalizers To clear the meter totalizers, click on the Clear Totalizers button in
the Properties window. The meter totalizers are reset to 0.
To Next Page
Loading...
