GE AquaTrans AT868 - Setting the Meter Clock

PanaView™ for IDM-Compatible Meters (916-086B) F-9
September 2004
Setting the Meter Clock The meter’s Time may be reset in three different ways:
• manually enter the time and date in the text box, or
• click on the [Sync to PC] option button to have PanaView™ set
the time and date to the current PC setting, or
• click on the [Set] option button to open the dialog box shown in
Figure F-10 below. Set the desired date and time as indicated,
and click on the
[OK] option button.
Figure F-10: Time and Date Selection Window