GE AquaTrans AT868 - Taking Measurements

September 2004
3-4 Displaying Data
Taking Measurements PanaView™ offers a unique command that enables you to pause and
restart the measurement. When you pause the measurement, the
AT868 suspends taking measurements; therefore, all outputs are also
affected. This option is only accessible using PanaView™; this
option is not available via the meter keypad (refer to Figure F-4 on
page F-4 in Appendix F, PanaView™ for IDM-Combatible Meters.)
Pausing the Measurement
Display
1. Open PAUSE MEASUREMENT from the Edit Functions menu.
2. Select Stop Measurement.
3. PanaView™ automatically stops taking measurements and exits
the Edit Functions menu.
Restarting the
Measurement Display
1. Open PAUSE MEASUREMENT from the Edit Functions menu.
2. Select Measure Flow.
3. PanaView™ automatically begins taking measurements and exits
the Edit Functions menu.