September 2004
F-12 PanaView™ for IDM-Compatible Meters (916-086B)
Handling Site Files To access site files, click on the Site Files button in the Properties
window. The Site File Operations window (shown in Figure F-14
below) opens.
Figure F-14: The Site File Operations Window
Saving an Existing Site to
the Meter
To save an existing site to the meter:
1. Select the radio button for Selected and highlight an existing site
in the left pane.
2. Then click on the Save Site to Meter button. A screen opens
similar to Figure F-15 below.
Figure F-15: Site File Selection
3. Highlight the desired site and click Open. PanaView™ sends the
site to the meter.
To Next Page
Loading...
