PanaView™ for IDM-Compatible Meters (916-086B) F-15
September 2004
Changing Meter Settings Through PanaView™, users of IDM-compatible meters can handle
remote programming of the meter. They can:
• Program and change a meter’s operating parameters;
• Set up, start, and stop logs;
• Calibrate and test inputs and outputs;
• Clear various files.
To access meter programming:
1. Enter the New Meter Browser option from the "File" menu.
2. Expand the network tree until you reach the desired meter.
3. Then expand the meter tree as shown in Figure F-18 below.
Figure F-18: New Meter Browser with Meter Branch
To Next Page
Loading...
