CERT-DOC-H4 August 2004
GE Infrastructure
Sensing
DECLARATION
OF
CONFORMITY
TÜV ESSEN
ISO 9001
U.S.
TÜV
We, Panametrics Limited
Shannon Industrial Estate
Shannon, County Clare
Ireland
declare under our sole responsibility that the
AT868 AquaTrans™ Ultrasonic Flowmeter
UPT868-P UltraPure Flow™ Measurement System
to which this declaration relates, are in conformity with the following standards:
• EN 61326:1998, Class A, Annex A, Continuous Unmonitored Operation
• EN 61010-1:1993 + A2:1995, Overvoltage Category II, Pollution Degree 2
following the provisions of the 89/336/EEC EMC Directive and the 73/23/EEC Low Voltage Directive.
The
units listed above and any transducers supplied with them (spoolpieces are addressed under a separate
declaration of conformity)
do not bear CE marking for the Pressure Equipment Directive, as they are supplied in
accordance with Article 3, Section 3 (sound engineering practices and codes of good workmanship) of the Pressure
Equipment Directive 97/23/EC for DN<25.
Shannon - June 1, 2002
Mr. James Gibson
GENERAL MANAGER
To Next Page
Loading...
