GE DigitalFlow GF868 - C.3 Setting Up the Communications Port

96 DigitalFlow™ GF868 Programming Manual (1-Channel)
[no content intended for this page]
C.3 Setting Up the Communications Port
Use the steps below to establish communications with the GF868.
1. Open the “New Meter Browser” window and expand the network tree. Then, highlight the My Computer(Name)
branch by clicking on it.
2. Pull down the “Edit” menu by clicking on it in the menu bar.
3. Click on the “New” menu option to select it, and a submenu opens with two choices on it (see Figure 17).
Figure 17: The Edit Menu