GE DigitalFlow GF868 - Appendix D. Foundation Fieldbus Communications

DigitalFlow™ GF868 Programming Manual (1-Channel) 103
Appendix C. Programming with PanaView
C.5.1 Setting the Meter Clock
The meter’s Time may be reset in three different ways:
• manually enter the time and date in the text box, or
• click on the [Sync to PC] option button to have PanaView set the time and date to the current PC setting, or
• click on the [Set] option button to open the dialog box shown in Figure 26. Set the desired date and time as
indicated, and click on the
[OK] option button.
Figure 26: Time and Date Selection Window