DigitalFlow™ GF868 Programming Manual (1-Channel) 71
Chapter 5. Clearing Data
5.3 Deleting Site Files
Use the SITE submenu to clear site files from the GF868’s memory. Use the [SCREEN] key to activate the desired display
pane, and complete the following steps:
1. To access the Clear Menu, press the [CLR] key.
a. If you have activated the security feature (see Chapter 1, Programming Site Data, page 35 for details), enter the
assigned password and press [ENT].
2. Press [F2] = SITE.
3. At the Site Name prompt, use the [, [ and [F1]-[F4] keys to select a site file for deletion. To leave the SITE
submenu, press the [EXIT] key.
Note: At the Site Name prompt, the option bar shows the names of all site files currently stored in memory.
4. Press [F1] to abort the procedure or press [F2] to Clear the specified site file. If any site files remain in memory, the
Site Name prompt repeats.
When all of the stored site files have been cleared or the [EXIT] key has been pressed at the SITE NAME prompt, the
programming sequence resumes at this point.
5.3.1 Procedure Options
Do one of the following:
• Press [F1]-[F3] to enter one of the CLR submenus.
• Press the [EXIT] key to return to the data measurement display.
To Next Page
Loading...
