Chapter 5. Clearing Data
72 DigitalFlow™ GF868 Programming Manual (1-Channel)
5.4 Deleting Log Files
Use the LOG submenu to clear log files from the Model GF868’s memory. Press the appropriate side of the [SCREEN] key
to activate the desired pane of the data display screen, and complete the following steps:
1. To access the Clear Menu, press the [CLR] key.
a. If you have activated the security feature (see Chapter 1, Programming Site Data, page 35 for details), enter the
assigned password and press [ENT].
2. Press [F3] = LOG.
3. At the Name prompt, the option bar shows the names of all log files currently stored in memory. Use the [, [
and [F1]-[F4] keys to select a log file for deletion. To leave the LOG submenu, press the [EXIT] key.
4. Press [F1] to abort the procedure or press [F2] to Clear the specified log file. If any log files remain in memory, the
Name prompt repeats.
When all of the stored log files have been cleared or the [EXIT] key has been pressed at the Name prompt, the
programming sequence resumes at this point.
5.4.1 Procedure Options
Do one of the following:
• Press [F1]-[F3] to enter one of the CLR submenus.
• Press the [EXIT] key to return to the data measurement display.
To Next Page
Loading...
