DigitalFlow™ GF868 Programming Manual (1-Channel) 109
Appendix C. Programming with PanaView
C.6 Changing Meter Settings
Through PanaView, GF868 users can handle remote programming of the meter. They can:
• Program and change a meter’s operating parameters;
• Set up, start, and stop logs;
• Calibrate and test inputs and outputs;
• Clear various files.
To access meter programming:
1. Enter the New Meter Browser option from the “File” menu.
2. Expand the network tree until you reach the desired meter.
3. Then expand the meter tree as shown in Figure 34.
Figure 34: New Meter Browser with Meter Branch
To Next Page
Loading...
