GE Discovery NM/CT 670 - Page 60

Equipment Description and General Construction Requirements 2.2 Room Size, Layout and Considerations
2.2.2 System Layout Drawings
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare 2-17
Figure 2-10: Minimal Room Layout
 Defines the minimum area
required to enable
installation, operation and
service of the system in safe
conditions.
 Does not take into account
local requirements.
 Operator movement round
the system is limited.
 Cannot use table extender.
 The operator room is not
taken into account in the
room dimensions.
 Space must be allocated
for the operator room. The
location can differ.
Note:
Dimensions are in mm