GE Discovery NM/CT 670 - Page 61

Equipment Description and General Construction Requirements 2.2 Room Size, Layout and Considerations
2.2.2 System Layout Drawings
Discovery NM/CT 670 – Standard Integration Instructions
5483063-1EN, Rev.2, ©2015 GE Healthcare 2-18
Figure 2-11: Recommended Layout
Note:
Dimensions are in mm
Lead glass
window
Optimal + Extender Layout
350
ext
50
1600 – CT Scan Length1150 – NMFOV to CT50+100 400 FOV
6450 - Footprint
Pivot – 2000
250
4200
6750
 Defines the recommended
room dimensions required to
enable installation, operation
and service of the system in
safe conditions.
 Does not take into account
local requirements.
 Enables relative freedom of
movement for operator and
service.
 Enables installation of table
extender.
 Can keep two collimator carts
in the room.
 The operator room is not taken
into account in the room
dimensions.
 Space must be allocated for
the operator room, but the
location can differ.