x | ADTS 405 Mk2 Instruction Manual-English © 2015 General Electric Company – All rights reserved.
4.3 Maintenance Tasks 52
4.4 Routine Maintenance 53
4.4.1 Servicing Procedures 53
4.4.2 Replacing the output connector o-ring 53
4.4.3 Fuse Replacement 53
4.5 Cable tests 56
5. TESTING AND FAULT FINDING 59
5.1 Introduction 59
5.2 Error messages 59
5.3 Standard Serviceability Test 60
5.3.1 Procedure 60
5.3.2 Fault Finding 61
5.4 Fault Diagnosis 62
5.5 Ventilating after Overpressure 63
5.6 Further Testing 65
5.6.1 Environmental and preliminary operations 65
5.6.2 Pressure Leak check 65
5.6.3 Vacuum leak check 66
5.6.4 Range Check 66
5.6.5 Controller Stability 66
5.6.6 Testing of Standard and Optional External Communication Ports 67
5.6.7 Testing of IEEE 488 Facility 68
5.6.8 Testing the Altimeter Encoder Option 69
6. REFERENCE AND SPECIFICATION 71
6.1 Introduction 71
6.2.1 F1 - F4 72
6.2.2 ALT/Ps 72
6.2.3 SPEED/Qc 72
6.2.4 MACH/Pt 73
6.2.5 EPR 73
6.2.6 ROC/Ps RATE 73
6.2.7 RATE TIMER 73
6.2.8 HOLD 74
6.2.9 RATE 75
6.2.10 LEAK MEASURE/CONTROL 75
6.2.11 GROUND 76
6.2.12 [GO TO GROUND] 76
6.2.13 [DISPLAY QFE] 76
6.2.14 [DISPLAY QNH] 77
6.2.15 PORT 77
6.2.16 REMOTE 77
6.2.17 PRINT 77
6.2.18 EXECUTE TEST PROGRAM 78
6.2.19 HELP 79
6.2.20 or (Nudge Keys) 79
6.2.21 Number 0 to 9 79
6.2.22 -000 80
To Next Page
Loading...
Need help?
General
