vi | ADTS 405 Mk2 Instruction Manual-English © 2015 General Electric Company – All rights reserved.
RETURNED GOODS PROCEDURE
If the unit is unserviceable and requires a repair return to a GE Service Centre. Contact the GE
Service Centre, either by 'phone, fax or e-mail to obtain a Returned Goods Authorization (RGA)
number, providing the following information:
• Product (i.e. ADTS 405)
• Pressure medium (i.e. air, nitrogen)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions
SAFETY PRECAUTIONS
See Safety and Installation Guide 124M8686
Note: Do not use unauthorized sources to service this equipment as this will affect the
warranty and may not guarantee further performance.
PRESSURE UNITS AND CONVERSION FACTORS
Pressure units Factor (hPa) Pressure units Factor (hPa)
mbar 1.0 cmH
2
O @ 20°C 0.978903642
bar 1000.0 mH
2
O @ 20°C 97.8903642
Pa (N/m
2
)0.01 kg/m
2
0.0980665
hPa 1.0 kg/cm
2
980.665
kPa 10.0 torr 1.333223684
MPa 10000.0 atm 1013.25
mmHg @ 0°C 1.333223874 psi 68.94757293
cmHg @ 0°C 13.33223874 lb/ft
2
0.4788025898
mHg @ 0°C 1333.223874 inH
2
O @ 4°C 2.4908891
inHg @ 0°C 33.86388640341 inH
2
O @ 20°C 2.486413
mmH
2
O @ 4°C 0.0980665 inH
2
O @ 60°F 2.487641558
cmH
2
O @ 4°C 0.980665 ftH
2
O @ 4°C 29.8906692
mH
2
O @ 4°C 98.0665 ftH
2
O @ 20°C 29.836983
mmH
2
O @ 20°C 0.097890364 ftH
2
O @ 60°F 29.8516987
To Next Page
Loading...
Need help?
General
