Power Circuit Breaker
Global Catalogue number structure
-- Codes built in the indicated manner can be used as an alternative ordering method
-- Breaker mounted accessories.
EntelliGuard G
APPENDIX
6.1
CATALOGUE
6.1-01
English
9th digit
10th digit 12th digit
11th digit 13th digit
Shunt Release
Voltage Rating Code
24V DC
A
40-48VDC 48V AC
B
60V DC
D
110-130V AC-DC
E
220-240V AC-DC
G
250V DC 277V AC
H
380-415V AC
K
440V AC
L
Network Interlock 1
None X
Add 1st Shunt Release by
indicating voltage rating
code. if not needed use an
X as indicated, or '1' for a
network Interlock
Undervoltage Release
Voltage Rating Code
24V DC
1
40-48VDC 48V AC
3
60V DC
4
110-130V AC-DC
5
220-240V AC-DC
7
250V DC 277V AC
8
380-415V AC
W
440V AC
Y
None X
Add 1st UVR release by using the
indicated code. If a ‘1’ is chosen
as a 9th digit the use of a
Network Interlock with
equivalent voltage is assumed.
The use of an X indicates no
Release installed.
2nd Shunt or UVR Release
Voltage Rating Shunt
code
UVR
code
24V DC
A 1
40-48VDC 48V AC
B 3
60V DC
D 4
110-130V AC-DC
E 5
220-240V AC-DC
G 7
250V DC 277V AC
H 8
380-415V AC
K W
440V AC
L Y
None X X
Add a 2nd or UVR Shunt Release by
indicating the voltage rating code. if
not needed use an X as indicated.
1 8 X 2 X
*** Each standard breaker or Isolator is normally supplied with 3 NO+3NC Aux.contacts (option 2)
Auxiliary Switches & Confi guration Code to be added***
3NO+3NC (Power Rated)***
2 A B C D E F G H S T
8NO+8NC (Power Rated)
4
3NO/3NC (Power Rated) + 2NO/2NC (Signal)
6 J K L M N P Q R U V
4NO/4NC (Power Rated) + 4NO/4NC Signal)
8
No other contacts installed
Coil Signaling Contact Power (1 NO on Secondary
Disconnect) - Close Coil or command close coil
Coil Signaling Contact High Fidelity through Trip Unit -
Close Coil or command close coil
Coil Signaling Contact Power (1 NO on Secondary
Disconnect) - 1st Shunt
Coil Signaling Contact High Fidelity through Trip Unit
- 1st Shunt
Coil Signaling Contact Power (1 NO on Secondary
Disconnect) - 1st UVR
Coil Signaling Contact High Fidelity through Trip
Unit - 1st UVR
Coil Signaling Contact Power (1 NO on Secondary
Disconnect) - 2nd ST or 2nd UVR
through Trip Unit - 2nd ST or 2nd UVR Coil Signaling
Contact High Fidelity
Coil Signaling Contact Power (1 NO on Secondary
Disconnect) - All installed devices CC/CCC, ST, or UVR
Add one of the chosen combinations by using one of the indicated codes.
Bell Alarm Switch &
Operations Counter
Code to be added
Bell Alarm 1 NO
A D E F
Mechanical Operations Counter
B K L M
Bell Alarm 1NO & Mechanical
Operations counter
C G H J
Ready to C.ose contact 1 NO
Power Rated on Secondary terminals
1
Ready to C.ose contact 1 NO Signal
Rated on Secondary terminals
2
Ready to C.ose contact 1 NO Signal
Rated connected through Trip Unit
3
None X X X X
No other contacts installed
Ready to C.ose contact 1 NO Power
Rated on Secondary terminals
Ready to C.ose contact 1 NO SIgnal
Rated on Secondary terminals
Ready to C.ose contact 1 NO SIgnal
Rated connected Through Trip Unit
Coil Signaling Contact High Fidelity (1 NO -Through
Trip Unit) - All installed devices. CC/CCC, ST, or UVR)
To Next Page
Loading...
