GEK-113000AE F650 Digital Bay Controller 5-25
5 BOOTCODE AND FIRMWARE UPGRADE 5.2 FIRMWARE UPGRADE VERSION V7.00 OR HIGHER
5
5. If the file has not been successfully sent, the following message box is displayed.
Figure 5–40: ERROR SENDING FILE
6. After sending file, upgrading process starts
Figure 5–41: UPGRADE IN PROGRESS
7. When the flashing process has finished, a message appears informing that it is necessary reboot the unit in order to
start working with the new firmware version in the relay.
Figure 5–42: REBOOT MESSAGE
8. User settings and logic files downloading
To Next Page
Loading...
