GE F650 - Page 81

GEK-106310AE F650 Digital Bay Controller 3-15
3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE
3
CASE 1: If setting groups option is disabled at Setpoint >Control Elements> Setting group at source file, conversion will
perform in destination file as follow:
• Settings of different elements (Phase TOC High 1, 2 and 3) that belong to Setting group 1(SG1) at source file will be
copied in elements that belong to Setting Group 1 at destination file.
• Elements in the other setting groups will be configured with default values in configuration file.
CASE 2: If setting groups option is enabled at Setpoint >Control Elements> Setting group at source file, conversion will
perform in destination file as follow
• Settings of different elements (Phase TOC High 1, 2 and 3) that belong to different setting groups in source file will be
copied in elements that belong to first group of first three setting groups at destination file
• Protection elements in the other groups/setting groups will be configured with default values at destination file.
SG1 SG2 SG3 SG4 SG5 SG6
Phase
TOC High
G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3
Function ENABLED DISABLED
Input PHASOR(DFT)
Pickup
Level
0,10 1,50 2,00 1,00
Curve Definite time IEEE Ext Inv
TD
Multiplier
0,02 0,05 0,10 1,00
Reset INSTANTANEOUS
Voltage
Restraint
DISABLED
Snapshot
Events
ENABLED
SG1 SG2 SG3 SG4 SG5 SG6
Phase TOC
High
G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3 G1 G2 G3
Function ENABLED
ENABLED DISABLED ENABLED DISABLED
Input
PHASOR(DFT)
Pickup Level 0,10
1,00
1,50
1,00 2,00 1,00
Curve
Definite
time
IEEE
Ext Inv
Definite time
IEEE Ext
Inv
Definite time
IEEE Ext Inv
TD Multiplier 0,02
1,00 0,05 1,00 0,10 1,00
Reset
INSTANTANEOUS
Voltage
Restraint
DISABLED
Snapshot
Events
ENABLED