GE HEALTHCARE OPTIMA XR200AMX/XR220AMX
D
IRECTION 5336113-1EN, REVISION 10 INSTALLATION MANUAL
Chapter 4 Configuration Page 95
9. Position the Receiver Mount on the top cover. The mount is curved and will fit the contour of
the top cover when it is located in the proper position. See Figure 4-25 for approximate
location.
Figure 4-25 Receiver mount location
10. While holding the Receiver Mount securely in position, mark the locations for the 3 mounting
holes and the cable access hole. See Figure 4-26.
Figure 4-26 Mark holes
11. Drill the holes in the top cover using the drill bits provided in the kit. See Figure 4-27.
To Next Page
Loading...
