CAUTION
Do not repeatedly turn the power switch on and off unnecessarily. This may cause
malfunction.
CAUTION
Do not leave samples in the equipment after exposure. If left, these may degrade
and cause damage.
CAUTION
The Epi lights are in sets of two for the left and right sides. Ensure that they are
correctly installed. Do not mix light sources of differing types.
CAUTION
Ensure that the Epi lights are connected and locked in position before turning the
power on.
CAUTION
Keep the windows of the light sources clean and avoid touching them.
NOTICE
The UV trans tray will deteriorate with repeated UV radiation. This is normal. Replace
the UV trans tray when this deterioration becomes noticable in exposed images.
NOTICE
Do not disconnect the USB cable while the Control Software is running.
16 Getting Started with ImageQuant LAS 4000 28-9607-59 AB
2 Safety instructions
2.1 Safety precautions
To Next Page
Loading...
